Land Mobile Radio Analyzer and Coverage Measurement Guide : P25 Analyzer (Option 521) : Setup Menu
 
Setup Menu
Key Sequence: Setup
P25 Analyzer Setup Menu
Mod Type: Sets the type of modulation. The options are C4FM (Phase I, 12.5 kHz BW) or CQPSK (Phase I or Phase II, 6.25 kHz equivalent BW).
Rx Pattern: Selects the receiver Bit Error Rate pattern. Select a pattern from the list box with the arrow keys or rotary knob and press Enter. There are four available patterns:
Automatic Frequency Control (1011 Hz)
Standard Transmitter Test (O.153 or V.52)
Voice
Ctrl (Control) Channel
Tx Pattern: Selects the transmitter pattern to send when the Turn Sig‑Gen ON main menu key is selected. Select a pattern from the list box with the arrow keys or rotary knob and press Enter. Refer to Using the Signal Generator for Receiver or OTA Analysis for the list of available transmitter patterns.
NAC: Sets the Network Access Control (NAC) that is sent on the standard P25 1011 Hz Tx Pattern when testing receivers. 293 is the P25 system default value.
Squelch Lvl: Sets the squelch power level. When the Received Power is lower than the set squelch level, all summary graph measurements except for Received Pwr will be blanked out (--).
Averaging: Sets the refresh rate of the numerical values in the P25 Summary window. Setting a higher number (25 maximum) will reduce measurement jitter.