Land Mobile Radio Analyzer and Coverage Measurement Guide : LMR Coverage Mapping : Coverage Mapping Menu
 
Coverage Mapping Menu
Key Sequence: Measurement >... Coverage
Coverage Mapping Menu
 
 
Save/Recall Map Points
Mapping Type
Select the measurement parameter to be mapped and displayed in the bar graph. All three parameter values are saved for each data point in the saved .kml or .mtd file.
For P25, NXDN, dPMR, DMR, and PTC (ITCR and ACSES) measurements, the mapping options are RSSI, BER, or Mod Fid.
For TETRA measurements, the mapping options are RSSI, BER, or EVM (RMS Vector Error). Note that BER measurements are only valid for Base Station measurements.
For NBFM measurements, the mapping options are RSSI, THD, SINAD, or External SINAD.
Legend Setup
This submenu key is present only when the Map Display Type is selected. It opens a submenu to set the legend color threshold values. This menu is based on the Mapping Type submenu selection. See Figure: Legend Setup Menu.
Display Type
Map Graph
Press to toggle the display to Map or Graph.
Pan & Zoom
Opens the Pan & Zoom Menu.
Point Distance/Time Setup
Back
Returns to the previous Measurement menu.
Start/Stop Data Collection
Press this main menu key to start coverage mapping data collection based on Measurement Setup settings and Point Distance/Time Setup settings. A running count of collected data points is displayed at the bottom of the screen. Press again to stop data collection.