LMR Master™ S412E Programming Manual : NXDN Commands : :ABORt Subsystem
 
:ABORt Subsystem
The abort subsystem includes commands that allow the user to stop current measurement activities on the instrument.
:ABORt
Description
Restarts the current sweep and/or measurement. If :INITiate:CONTinuous is OFF (for example, the instrument is in hold mode), send the command :INITiate[:IMMediate] to trigger the next sweep. If :INITiate:CONTinuous is ON (for example, the instrument is in run mode), a new sweep will start immediately.
Cmd Parameters:
NA
Query Parameters:
NA
Range
NA
Default Value
NA
Default Unit
NA
Example
To abort a measurement:
:ABORt
Front Panel Access
NA