Parameter Name | Description |
SN | Instrument serial number. |
UNIT_NAME | Instrument name. |
TYPE | The data type (Setup or data). |
DATE | Trace date and time. |
APP_NAME | Application name. |
APP_VER | Application firmware (FW) version. |
GPS_FIX_AVAIL | Status of GPS lock. Please note that none of the GPS information will show if there is no GPS lock. |
GPS_FIX_TIME | Current UTC time shown in hours, minutes, seconds. Even if a file has been recalled, the current UTC time will be returned. |
GPS_FIX_LONGITUDE | Current longitude shown in degrees, minutes, seconds. Even if a file has been recalled, the current longitude will be returned. |
GPS_FIX_LATITUDE | Current latitude shown in degrees, minutes, seconds. Even if a file has been recalled, the current latitude will be returned. |
GPS_FIX_VALUE_TIME | Current UTC time shown as seconds elapsed since 0:00 January 1st, 1970. Even if a file has been recalled, the current UTC time will be returned. |
GPS_FIX_VALUE_LON | Current longitude shown in radians (as a long data type). Even if a file has been recalled, the current longitude will be returned. |
GPS_FIX_VALUE_LAT | Current latitude shown in radians (as a long data type). Even if a file has been recalled, the current latitude will be returned. |
RECEIVER_FREQ | Receiver (Rx) frequency. |
EXT_ATT | Receiver (Rx) power offset. |
REF_LVL | Reference level. For Analyzer, this setting corresponds to the Spectrum graph. |
REF_LVL_TX | Backup reference level for Analyzer. |
REF_LVL_TOC | Backup reference level for Coverage (Not in use with new mapping style). |
SCALE | Scale. For Analyzer, this setting corresponds to the Spectrum graph. |
SCALE_TX | Backup scale for Analyzer. |
SCALE_TOC | Backup scale for Coverage (Not in use with new mapping style). |
TOC_BER_REF | BER reference percentage (Not in use with new mapping style). |
TOC_MOD_FID_REF | Mod fid reference percentage (Not in use with new mapping style). |
GRAPH_TYPE | Graph type of the selected graph (Active graph). |
GRAPH_TYPE_TX | Backup graph type for Analyzer. |
GRAPH_TYPE_TOC | Backup graph type for Coverage (Not in use with new mapping style). |
TRACE_GRAPH_TYPES | Graph types for all 4 traces. This uses a bit mask shift, where the bit shift mask is defined as: GRAPH_TYPE_BIT_SHIFT 16 GRAPH_TYPE_BIT_MASK 0xFFFF |
TRACE_GRAPH_TYPES_TX | Backup trace graph type for Analyzer. |
TRACE_GRAPH_TYPES_TOC | Backup trace graph type for Coverage (Not in use with new mapping style). |
ACTIVE_GRAPH | Selected graph. |
ACTIVE_GRAPH_TX | Backup active graph for Analyzer. |
ACTIVE_GRAPH_TOC | Backup active graph for Coverage (Not in use with new mapping style). |
MAXIMIZE_GRAPH | Determines whether active graph is maximized or minimized. |
MAXIMIZE_GRAPH_TX | Backup maximize graph for Analyzer. |
MAXIMIZE_GRAPH_TOC | Backup maximize graph for Coverage (Not in use with new mapping style). |
TOTAL_GRAPHS | Total graphs shown on the screen when minimized. Analyzer is hard coded to 4 graphs. |
MEAS_TYPE | Measurement type. 0 = Analyzer 1 = Not used 2 = Control (Only used in P25, P25p2, NXDN, DMR) 3= Bit Capture (Only used in P25, P25p2, NXDN, DMR) 4 = Coverage 5 = NBFM Quieting (Only used in NBFM) 6 = NBFM SINAD (Only used in NBFM) |
EXTERNAL_REFERENCE | Not used. |
REFERENCE_FREQUENCY | The frequency to which the external reference is locked. |
MEAS_DISPLAY | State of the numerical display window in the Coverage measurement. |
MEAS_DISPLAY_TX | Backup measurement display for Analyzer. |
MEAS_DISPLAY_TOC | Backup measurement display for Coverage (Not in use with new mapping style). |
PATTERN | Receiver (Rx) pattern. |
DYNAMIC_ATTENUATION | Auto receiver (Rx) range. Determines if reference level is automatically adjusted according to the receiver input signal. |
LOG_TYPE | Auto logging type (Not in use with new mapping style). |
KML_FLAG_LABEL | Not used. |
KML_FLAG_TIME | Not used. |
SYMBOL | Number of symbols shown in the horizontal axis of the Analyzer Eye Diagram. |
RECEIVER_UNITS | Receiver unit type. 0 is dBm, 1 is Watts, 2 is Volts. |
GENERATOR_UNITS | Generator unit type. 0 is dBm, 1 is Watts, 2 is Volts. |
GENERATOR_OUTPUT | State of the signal generator. 0 is ON and 1 is OFF. |
GENERATOR_FREQ | Frequency of the signal generator. |
GENERATOR_PATTERN | Pattern that the signal generator is outputting. The value corresponds to the index (starting from 0) of the list returned from issuing a :SOURce:DM:PATTern:LIST? command. |
GENERATOR_OUTPUT_LVL | Output power level of the signal generator. |
GENERATOR_OUTPUT_LVL_BK | Backup generator power level. Used to store original generator power level when Tx Power Offset is applied. |
HEX_TRIGGER | State of hex triggering for Control Channel. 0 is ON and 1 is OFF. |
HEX_TRIGGER_VALUE | When value is detected in the first octet of a Control Channel packet, the unit will be put into Hold mode. |
COUPLING | State of frequency coupling. 0 is ON and 1 is OFF. |
FREQ_COUPLING_OFFSET | Amount that the Receiver (Rx) and Generator (Tx) frequency is offset by when frequency coupling is ON. |
GENERATOR_LVL_OFFSET | Generator (Tx) power offset. |
SQUELCH | Squelch level for the Analyzer summary window. |
SQUELCH_BK | Backup value for squelch level when Receiver Power Offset is applied. |
SPAN | Receiver (Rx) span. |
AVERAGING | Number of times numerics in the summary window are averaged. |
AM_PERCENTAGE | Percentage for the am_1khz_audio generator pattern. |
FM_DEVIATION | Deviation for the fm_1khz_audio generator pattern. |
NAC | Not used. |
NAC_BK | Not used. |
RSSI_MAPPING_EXCELLENT | Threshold at which the RSSI mapping value is deemed excellent (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
RSSI_MAPPING_VERY_GOOD | Threshold at which the RSSI mapping value is deemed very good (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
RSSI_MAPPING_GOOD | Threshold at which the RSSI mapping value is deemed good (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
RSSI_MAPPING_FAIR | Threshold at which the RSSI mapping value is deemed fair (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
RSSI_MAPPING_POOR | Threshold at which the RSSI mapping value is deemed poor (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
BER_MAPPING_EXCELLENT | Threshold at which the BER mapping value is deemed excellent (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
BER_MAPPING_VERY_GOOD | Threshold at which the BER mapping value is deemed very good (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
BER_MAPPING_GOOD | Threshold at which the BER mapping value is deemed good (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
BER_MAPPING_FAIR | Threshold at which the BER mapping value is deemed fair (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
BER_MAPPING_POOR | Threshold at which the BER mapping value is deemed poor (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
MOD_FID_MAPPING_EXCELLENT | Threshold at which the Mod Fid mapping value is deemed excellent (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
MOD_FID_MAPPING_VERY_GOOD | Threshold at which the Mod Fid mapping value is deemed very good (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
MOD_FID_MAPPING_GOOD | Threshold at which the Mod Fid mapping value is deemed good (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
MOD_FID_MAPPING_FAIR | Threshold at which the Mod Fid mapping value is deemed fair (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
MOD_FID_MAPPING_POOR | Threshold at which the Mod Fid mapping value is deemed poor (Only used in P25, P25p2, NXDN, dPMR, DMR, PTC-ITCR and PTC-ACSES). |
MAPPING_TYPE | Mapping value that is being compared with threshold values. |
NUMERIC_DISPLAY | Determines what values are displayed in the Analyzer summary window. |
DEMOD_TYPE | Modulation type (used with P25, P25p2, DMR, and PTC-ITCR and PTC-ACSES). |
MOD_BANDWIDTH | Modulation bandwidth (used with NXDN and dPMR only). |
RX_SLOT | Receiver (Rx) time slot selection (Only used for DMR). |
TX_SLOT | Generator (Tx) time slot selection (Only used for DMR). |
HIGH_PASS_FILTER | High pass filter selection (Only used for NBFM). 0 is 300 Hz, 1 is 3 kHz, 2 is None. |
LOW_PASS_FILTER | Low pass filter selection (Only used for NBFM). 0 is 300 Hz, 1 is 3 kHz, 2 is 15 kHz, 3 is None. |
AUDIO_SPECTRUM_SPAN | Span for the Audio Spectrum graph in NBFM Analyzer (Only used in NBFM). |
AUDIO_WAVE_SWEEP_TIME | Sweep time for the Audio Waveform graph in NBFM Analyzer (Only used in NBFM). |
DEEMPHASIS | State of the De-emphasis filter (Only used in NBFM). 0 is ON and 1 is OFF. |
SINAD_MAPPING_EXCELLENT | Threshold at which the SINAD mapping value is deemed excellent (Only used in NBFM). |
SINAD_MAPPING_VERY_GOOD | Threshold at which the SINAD mapping value is deemed very good (Only used in NBFM). |
SINAD_MAPPING_GOOD | Threshold at which the SINAD mapping value is deemed good (Only used in NBFM). |
SINAD_MAPPING_FAIR | Threshold at which the SINAD mapping value is deemed fair (Only used in NBFM). |
SINAD_MAPPING_POOR | Threshold at which the SINAD mapping value is deemed poor (Only used in NBFM). |
CARRPWR_MAPPING_EXCELLENT | Threshold at which the Carrier Power mapping value is deemed excellent (Only used in NBFM). |
CARRPWR_MAPPING_VERY_GOOD | Threshold at which the Carrier Power mapping value is deemed very good (Only used in NBFM). |
CARRPWR_MAPPING_GOOD | Threshold at which the Carrier Power mapping value is deemed good (Only used in NBFM). |
CARRPWR_MAPPING_FAIR | Threshold at which the Carrier Power mapping value is deemed fair (Only used in NBFM). |
CARRPWR_MAPPING_POOR | Threshold at which the Carrier Power mapping value is deemed poor (Only used in NBFM). |
THD_MAPPING_EXCELLENT | Threshold at which the THD mapping value is deemed excellent (Only used in NBFM). |
THD_MAPPING_VERY_GOOD | Threshold at which the THD mapping value is deemed very good (Only used in NBFM). |
THD_MAPPING_GOOD | Threshold at which the THD mapping value is deemed good (Only used in NBFM). |
THD_MAPPING_FAIR | Threshold at which the THD mapping value is deemed fair (Only used in NBFM). |
THD_MAPPING_POOR | Threshold at which the THD mapping value is deemed poor (Only used in NBFM). |
AUTO_SCAN | State of auto scan. Determines if instrument will automatically scan for a signal and set the receiver frequency to the signal with the highest signal strength (Only used in NBFM). 1 is OFF and 0 is ON. |
OCC_BW_METHOD | Occupied bandwidth method (Only used in NBFM). 0 is % Int Power and 1 is > dBc. |
OCC_BW_PERCENT | % Int Power (Only used in NBFM). |
OCC_BW_DBC | > dBc (Only used in NBFM). |
TONE_TYPE | Tone type selection (Only used in NBFM). Determines display of the last summary slot. 0 is CTCSS, 1 is DCS, and 2 is DTMF. |
CTCSS_FREQ | Frequency of CTCSS generator pattern (Only used in NBFM). |
DCS_TYPE | Type of DCS generator pattern (Only used in NBFM). |
DTMF_TONE | Tone of DTMF generator pattern (Only used in NBFM). |
FREQ_DISPLAY_TYPE | Determines whether carrier frequency or frequency error is shown in the summary window (Only used in NBFM). 0 is Carrier Frequency, 1 is Frequency Error. |
TONE_DEVIATION | Tone deviation for the nbmf_ctcss, nbfm_dcs, nbfm_1khz_ctcss, and nbfm_1khz_dcs generator patterns (Only used in NBFM). |
IF_BANDWIDTH | IF Bandwidth setting (Only used in NBFM). 0 is 5 kHz, 1 is 6.25 kHz, 2 is 10 kHz, 3 is 12.5 kHz, 4 is 30 kHz, 5 is 50 kHz. |
IF_BANDWIDTH_PERCENT | Percent of IF Bandwidth used to calculate Y-Axis for Audio Spectrum and Audio Waveform graphs in NBFM Analyzer (Only used in NBFM). |
WACN_ID | Not used. |
SYSTEM_ID | Not used. |
COLOR_CODE | Not used. |