LMR Master™ S412E Programming Manual : All Mode Commands : :INSTrument Subsystem
 
:INSTrument Subsystem
One instrument may contain many logical instruments (“modes”). This subsystem controls the selection of the current instrument mode.
:INSTrument:CATalog:FULL?
Title
Query Available Modes
Description
Returns a comma‑separated list of available modes. Mode names are enclosed in double quotes (“ ”). The application number immediately follows the string name. For example: “HI_PM”10,”MWVNA”26
Cmd Parameter
NA (query only)
Query Response
NA (comma-separated list)
Front Panel Access
Shift‑9 (Mode) or Menu
:INSTrument:NSELect <integer>
:INSTrument:NSELect?
Title
Select Mode by Number
Description
Sets the instrument mode based on the value of <integer>. The query version returns the number that is associated with the current mode. Use :INSTrument:CATalog:FULL? to get a list of available mode names and their integer representations.
Note 
Switching modes can take longer than 80 seconds, depending on the application. Add a delay of at least 90 seconds between mode switch commands. Anritsu Company advises you to set the remote PC time‑out to 120 seconds in order to avoid unexpected time‑out errors.
Cmd Parameter
<NR1> (integer)
1 = SPA (Spectrum Analyzer mode)
10 = HI_PM (High Accuracy Power Meter mode)
18 = WIMAX_D (Fixed WiMAX mode)
19 = WIMAX_E (Mobile WiMAX mode)
26 = MWVNA (Microwave LMR Master mode)
29 = LTE (LTE Analyzer mode)
37 = P25 (P25 Analyzer mode)
39 = TDLTE (TDD LTE Analyzer mode)
44 = P25_2 (P25 Phase 2 Analyzer mode)
38 = NXDN (NXDN Analyzer mode)
50 = dPMR Signal Analyze
41 = DMR_2 (DMR Analyzer mode)
42 = PTC-ITCR (PTC-ITCR Analyzer mode)
54 = PTC-ACSES (PTC-ACSES Analyzer mode)
43 = NBFM (NBFM Analyzer mode)
45 = TETRA (TETRA Analyzer mode)
6 = PM (Power Meter mode)
30 = AMFMPM (AM/FM/PM Analyzer mode)
15 = CS (Channel Scanner mode)
14 = IA (Interference Analyzer mode)
22 = CWSG (CW Signal Generator mode)
102 = VVM (Vector Voltmeter mode)
Related Command
:INSTrument:CATalog:FULL?
:INSTrument[:SELect]
Front Panel Access
Shift‑9 (Mode) or Menu
:INSTrument[:SELect] <string>
:INSTrument[:SELect]?
Title
Select Mode by Name
Description
Sets the instrument mode based on the mode name that is specified by <string>. The query version returns the name of the current mode. Use :INSTrument:CATalog:FULL? to get a list of available modes. For example, for Vector Voltmeter, use “VVM”.
Cmd Parameter
<string> SPA|HI_PM|WIMAX_D|WIMAX_E|MWVNA|LTE|TDLTE|P25|P25_2|
NXDN| DPMR|DMR_2|PTC-ITCR|PTC-ACSES|NBFM|TETRA|PM|AMFMPM|CS|
IA|CWSG|
VVM
SPA = Spectrum Analyzer mode
HI_PM = High Accuracy Power Meter mode
WIMAX_D = Fixed WiMAX mode
WIMAX_E = Mobile WiMAX mode
MWVNA = Microwave LMR Master mode
LTE = LTE Analyzer mode
TDLTE = TDD LTE Analyzer mode
P25 = P25 Analyzer mode
P25_2 = P25 Phase 2 Analyzer mode
NXDN = NXDN Analyzer mode
DPMR = dPMR Analyzer mode
DMR_2 = DMR Analyzer mode
PTC-ITCR = PTC-ITCR Analyzer mode
PTC-ACSES = PTC-ACSES Analyzer mode
NBFM = NBFM Analyzer mode
TETRA = TETRA Analyzer mode
PM = Power Meter mode
AMFMPM = AM/FM/PM Analyzer mode
CS = Channel Scanner mode
IA = Interference Analyzer mode
CWSG = CW Signal Generator mode
VVM = Vector Voltmeter mode
Related Command
:INSTrument:CATalog:FULL?
:INSTrument:NSELect
Front Panel Access
Shift‑9 (Mode) or Menu