This subsystem provides commands that modify the display of data for the user. They do not modify the way in which data are returned to the controller.
:DISPlay:WINDow:TRACe:Y:ADJust
Title
Adjust Range
Description
Automatically adjusts reference level if input signal strength is too high (ADC error) or too low.
Sets the reference level amplitude value for the y-axis. Note that this may cause a change in attenuation if the automatic input attenuation coupling is enabled.
Parameter
<amplitude>
Default Value
10 dBm
Default Unit
Current active amplitude unit
Range
With reference level offset = 0 dB: 30 dBm to -150 dBm
Example
To set the reference level to 15 dBm (If y-axis is dBm)