 | Factory Defaults Press this key to restore the instrument to the default settings for all measurement modes and system settings, including connectivity, language, and the display and audio settings. The instrument will power cycle when the operation is complete. Press the Enter key to initiate the reset, or press Esc to abort. Note: This same reset sequence can be initiated when turning the LMR Master on by pressing and holding the Esc key until the Anritsu splash screen is displayed. Master Reset Press this submenu key to restore the instrument to factory defaults as described above and to delete all user files from the instrument internal memory. The instrument will power cycle when the operation is complete. Press Enter to initiate the reset, or press Esc to abort. Note: This same reset sequence can be initiated when turning the LMR Master on by pressing and holding the System (8) key until the Anritsu splash screen is displayed. Update Firmware Press this submenu key to update the instrument operating system from an external USB memory device. Press Update Firmware to start the update procedure, or press the Menu key to cancel and display the Menu key screen of application icons. Refer to Updating the LMR Master Firmware for additional information on firmware update. Back Press this submenu key to return to the System Options Menu. |