DTP Aid Menu

Key Sequence: Freq/Dist > DTP Aid

or

Key Sequence: Sweep/Setup > DTP Aid

DTP Aid Menu

Units Press this submenu key to display the Units menu.         Start Calibration Press this submenu key to initiate the calibration process. The calibration that is used for a DTP measurement is a normalized calibration using a – 80 dBm PIM standard. Back Press this submenu key to return to the previous menu (Freq/Dist or Sweep/Setup).   Units Menu   Meters Press this submenu key to set the units to meters.   Feet Press this submenu key to set the units to feet.

 

 

Copyright 2010, 2011 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00027, Rev. B
	mmdtechpubs@anritsu.com