DTP Setup Menu
 |
Cable Loss
Press this submenu key to enter the loss in dB/ft or dB/m for the selected cable by using the keypad, the arrow keys, or the rotary knob, and then press Enter.
Prop Velocity
Press this submenu key to enter the applicable propagation velocity for the selected cable by using the keypad, the arrow keys, or the rotary knob, and then press Enter.
Press this submenu key to open a list of available cable specifications (refer to Figure 2-10). Using the arrow keys, the rotary knob, or the touch screen, select the desired cable and then press Enter.
If a cable is selected from this list, then the cable loss and propagation velocity are set automatically, and you do not need to set those values with the other submenu keys.
Press this submenu key to open the Windowing menu. The options are: Rectangular, Nominal Side Lobe, Low Side Lobe, and Minimum Side Lobe. Refer to Windowing for more information about windowing.
|
Settings for Cable Loss, Propagation Velocity, and the Cable list box can also be initiated by highlighting their values in the DTP Parameters window. Refer to Figure: DTP Parameters Window.
