This menu is displayed when the Preset State button is highlighted in the DTP Parameters window (Figure: DTP Parameters Window).
 |
Preset State List
Press this submenu key to open the Select DTP Preset State list box and select one of the following:
A – User Defined: Allows you to choose all parameters for DTP.
|
The Select DTP Preset State list box is shown in Figure: Select DTP Preset State List Box. A complete list of the parameters for each preset state is described in Preset State Definitions.
This menu is displayed when the Data Points button is highlighted in the DTP Parameters window (Figure: DTP Parameters Window).
 |
This menu is displayed when the Cable button is highlighted in the DTP Parameters window (Figure: DTP Parameters Window).
 |
Cable List
Press this submenu key to display the Cable list box (refer to Figure: Cable List Box, Table of Specifications). Highlight a cable type in the list box and then press the Enter key to use those cable specifications for your measurement.
|
This menu is displayed when the Output Power button is highlighted in the DTP Parameters window (Figure: DTP Parameters Window).
 |
Power List
Press this submenu key to display a drop‑down list of the available power settings. Use the arrow keys or the rotary knob to scroll to (and highlight) the desired power setting. Then press the Enter key.
|
