•  S331L Site Master™ Programming Manual
  •  General Information
    • About this Manual
    • Introduction
    •  Remote Operation Setup and Interface
      • USB Interface Connection and Setup
      • Ethernet Interface Connection and Setup
      • Connectivity
      • Site Master LAN Connections
    •  Sending SCPI Commands
      • USB Connectivity
      • Ethernet Connectivity
  •  Programming with SCPI
    • Introduction
    •  Introduction to SCPI Programming
      • SCPI Common Commands
      • SCPI Required Commands
      • SCPI Optional Commands
    •  Subsystem Commands
      • Command Names
      • Hierarchical Command Structure
      • Query Commands
      • Data Parameters
      • Unit Suffixes
    • Notational Conventions
    •  Notational Examples
      • Command Terminators
    • Formatting Conventions
  •  All Mode Commands
    • :BASe:DIRectory:COPY <"source-directory">,<"destination-directory">
    • :BASe:DIRectory:DELete <"directory">, {1|0}
    • :BASe:DIRectory:MAKe <"directory">
    • :BASe:FILe:COPY <"source-filename">, <"destination-filename">
    • :BASe:FILe:DELete <"filename">
    • :CONFigure:BASe:FACTorydefault
    • :CONFigure:BASe:MASTerreset
    • :CONFigure:BASe:POWeroff 0|1
    • :CONFigure:VIP:ANALyze:AUTO ON|OFF|1|0
    • :FETCh:GPSData:RESet
    • :INSTrument:NSELect <application-mode-number>
    • :INSTrument:SELect <"mode-identifier">
    • :MMEMory:DELete <"filename">
    • :MMEMory:LOAD:STATe 1,<"filename">
    • :MMEMory:LOAD:TRACe 1,<"filename">
    • :MMEMory:STORe:PNG 0,<"filename">
    • :MMEMory:STORe:STATe 0,<"filename">
    • :MMEMory:STORe:TRACe <integer>,<"filename">
    • :PROGram:ETT:ABORtscript
    • :PROGram:ETT:LOADscript <"filename">
    • :PROGram:ETT:NEXTstep
    • :PROGram:ETT:STATe?
    • :SYSTem:CODeload
    • :SYSTem:PRESet
    • [:SENSe]:BASe:BRIGhtness <brightness-level>
    • [:SENSe]:BASe:NET:MANual:GATEway <"Default-Gateway">
    • [:SENSe]:BASe:NET:MANual:IP <"IP-address">
    • [:SENSe]:BASe:NET:MANual:SUBnet <"Subnet-Mask">
    • [:SENSe]:BASe:NET:MODE MANual|DHCP
    • [:SENSe]:BASe:NET:MODE:MANual:RESTart
    • [:SENSe]:BASe:REMote 0|1|2
    • [:SENSe]:BASe:SCRNshot:SCHeme INVerted|STANdard
    • [:SENSe]:BASe:TIME <time-in-seconds>
    • [:SENSe]:BASe:VOLume <volume-level>
    • [:SENSe]:BASe:VOLume:AUDio ON|OFF|1|0
  •  Cable & Antenna Analyzer Mode Commands
    • :CALCulate#:LIMit:LOWer:SEGMent:ADD <StartX><StopX><StartY><StopY>
    • :CALCulate#:LIMit:LOWer:SEGMent:DELete
    • :CALCulate#:LIMit:LOWer:SEGMent:EDIT <StartX><StopX><StartY><StopY>
    • :CALCulate#:LIMit:LOWer:SEGMent:STARt:X <value>
    • :CALCulate#:LIMit:LOWer:SEGMent:STARt:Y <amplitude>
    • :CALCulate#:LIMit:LOWer:SEGMent:STOP:X <value>
    • :CALCulate#:LIMit:LOWer:SEGMent:STOP:Y <amplitude>
    • :CALCulate#:LIMit:LOWer:Y <amplitude>{dB,s|ms|ns|ps}
    • :CALCulate#:LIMit:LOWer[:STATe] OFF|ON|0|1
    • :CALCulate#:LIMit:UPPer:SEGMent:ADD <StartX><StopX><StartY><StopY>
    • :CALCulate#:LIMit:UPPer:SEGMent:DELete
    • :CALCulate#:LIMit:UPPer:SEGMent:EDIT <StartX><StopX><StartY><StopY>
    • :CALCulate#:LIMit:UPPer:SEGMent:STARt:X <value>
    • :CALCulate#:LIMit:UPPer:SEGMent:STARt:Y <amplitude>
    • :CALCulate#:LIMit:UPPer:SEGMent:STOP:X <value>
    • :CALCulate#:LIMit:UPPer:SEGMent:STOP:Y <amplitude>
    • :CALCulate#:LIMit:UPPer:Y <amplitude>{dB,s|ms|ns|ps}
    • :CALCulate#:LIMit:UPPer[:STATe] OFF|ON|0|1
    • :CALCulate:LIMit:ALARm OFF|ON|0|1
    • :CALCulate:LIMit:LOWer:SEGMent:ACTive <Index>
    • :CALCulate:LIMit:MESSage OFF|ON|0|1
    • :CALCulate:LIMit:MODe
    • :CALCulate:LIMit:PRESet
    • :CALCulate:LIMit:TYPE 0|1
    • :CALCulate:LIMit:UPPer:SEGMent:ACTive <Index>
    • :CALCulate:LIMit:VALue <amplitude>{dB}
    • :CALCulate:LIMit[:STATe] OFF|ON|0|1
    • :CALCulate:MARKer#:PEAK
    • :CALCulate:MARKer#:PEAK:BOUNded
    • :CALCulate:MARKer#:TRACking PEAK|VALLey|BNDPeak|BNDValley|OFF
    • :CALCulate:MARKer#:TYPE REFerence|DELTa
    • :CALCulate:MARKer#:VALLey
    • :CALCulate:MARKer#:VALLey:BOUNded
    • :CALCulate:MARKer#:X <value>{Hz|kHz|MHz|GHz,m|cm|mm,ft,ps|ns|us|ms|s}
    • :CALCulate:MARKer#[:STATe] OFF|ON|0|1
    • :CALCulate:MARKer:DISPlay MKRTable|MKRonly|AOFF
    • :CALCulate:MARKer:PRESet
    • :CALCulate:MATH:FUNCtion NONE|SUBTraction|ADDition|AVERage
    • :CALCulate:MATH:MEMorize
    • :CALCulate:TRANsform:DISTance:CABLoss <cable-loss>{ dB/m,dB/ft}
    • :CALCulate:TRANsform:DISTance:PVELocity <propagation-velocity>
    • :CALCulate:TRANsform:DISTance:STARt <distance>{ m|cm|mm,ft}
    • :CALCulate:TRANsform:DISTance:STOP <distance>{ m|cm|mm,ft}
    • :CALCulate:TRANsform:DISTance:UNIT METers|FEET
    • :CALCulate:TRANsform:DISTance:WINDow RECTangular|MSLobe|NSLobe|LSLobe
    • :CAPTure:STARt
    • :CAPTure:STOP
    • :CAPTure:TRACe#:DATA? FDATa|SDATa|FMEM|SMEM
    • :CONFigure:MEASure:DISPlay SINGle|DUAL
    • :CONFigure:MEASure:MODe RLFReq|RLDTf|SWRFreq|SWRDtf|CLFReq|TR2P|TRES|SMITh|PHASe
    • :DISPlay:UPDate ON|OFF|1|0
    • :DISPlay:WINDow:TRACe:STATe TRACe|MEMory|BOTH
    • :DISPlay:WINDow:TRACe:Y[:SCALe]:AUToscale
    • :DISPlay:WINDow:TRACe:Y[:SCALe]:BOTTom <amplitude>{dB}
    • :DISPlay:WINDow:TRACe:Y[:SCALe]:FULLscale
    • :DISPlay:WINDow:TRACe:Y[:SCALe]:TOP <amplitude>{dB}
    • :FORMat[:READings][:DATA] ASCii|INTeger,32|REAL,32
    • :FORMat[:READings][:DATA]:MULTiplier 1|1M
    • :INITiate#:DATA? FDATa|SDATa|FMEM|SMEM
    • :INITiate:CONTinuous OFF|ON|0|1
    • :INITiate:HOLD OFF|ON|0|1
    • :INITiate[:IMMediate]
    • :SOURce:POWer LOW|HIGH
    • [:SENSe]:CORRection:COLLect:ABORt
    • [:SENSe]:CORRection:COLLect:INITialize
    • [:SENSe]:CORRection:COLLect:LOAD
    • [:SENSe]:CORRection:COLLect:OPEN
    • [:SENSe]:CORRection:COLLect:SAVe
    • [:SENSe]:CORRection:COLLect:SHORt
    • [:SENSe]:CORRection:COLLect:THRU
    • [:SENSe]:CORRection:COLLect:TYPE RFP1|2PFP|RRP1|TRFP|2PES|TRES
    • [:SENSe]:CORRection:COLLect:ZERO
    • [:SENSe]:CORRection:INSTacal:CALibrate
    • [:SENSe]:CORRection:TYPE STANdard|FLEX
    • [:SENSe]:CORRection[:STATe] ON|OFF|1|0
    • [:SENSe]:FREQuency:CABLe <cable-list-index>
    • [:SENSe]:FREQuency:CABLe:NAMe <"cable-name">
    • [:SENSe]:FREQuency:STARt <frequency>{ Hz|kHz|MHz|GHz}
    • [:SENSe]:FREQuency:STOP <frequency>{ Hz|kHz|MHz|GHz}
    • [:SENSe]:RFON[:STATe] ON|OFF|1|0
    • [:SENSe]:SWEep:IFBW <frequency>{ Hz|kHz|MHz|GHz}
    • [:SENSe]:SWEep:RESolution 130|259|517|1033|2065
    • [:SENSe]:SWEep:RFIMmunity HIGH|LOW|1|0
    • [:SENSe]:SWEep:TYPE CONTinuous|SINGle|EXTernal
    • [:SENSe]:TRACe:SELect 1|2
  •  Examples
    • C/C++
    • Visual Basic
    • Visual Basic
    • Visual Basic
    • LabVIEW™
  • List of Commands by Mode
  • List of Commands, Alphabetical

S331L Site Master™ Programming Manual

Anritsu Company