Site Masterâ„¢ S331L User Guide : Cable and Antenna Measurements : Measurement Setup
 
Measurement Setup
This section describes how to set up the Cable and Antenna parameters, markers, and limit lines.
Frequency
Setting up the Measurement Frequency using Start and Stop Frequencies
1. Press the Freq/Dist main menu key then Frequency if the menu is collapsed.
2. Press the Start Freq submenu key and enter the start frequency using the Up/Down arrow keys, rotary knob or keypad. When using the keypad, the button labels change to GHz, MHz, kHz, and Hz. Press the appropriate unit key to complete the entry.
3. Press Stop Freq and enter the stop frequency.
Distance
1. Press the Freq/Dist main menu key and then Distance if the menu is collapsed.
2. Press the Start Distance submenu key and enter the start distance using the Up/Down arrow keys, rotary knob or keypad. When entering a distance using the keypad, press the unit key to complete the entry.
3. Press Stop Dist and enter the stop distance.