 | Data Points Sets the number of data points: 130, 259, 517, 1033 or 2065. Run/Hold Toggles between Run and Hold. When in Hold mode, pressing this key starts the sweeping and provides a trigger. When in the Run mode, pressing this key pauses the sweep. Sweep Type This toggles the sweep between single sweep and continuous sweep. In single sweep mode, each sweep must be activated by the Run/Hold key. RF Immunity, High / Low The instrument defaults to RF Immunity High and is the suggested setting. See RF Immunity for details. RF Pwr In Hold Sets the RF Output power to be turned off when Run/Hold is toggled to Hold. See RF Pwr In Hold for details. |