Spectrum Analyzer Measurement Guide : Interference Analyzer (Option 25) : General Measurement Setups
General Measurement Setups
Refer to your instrument User Guide for instructions on setting up frequency, span, amplitude, GPS, limit lines, markers, and file management.
In Spectrum Analyzer mode, smart one‑button measurements are built‑in for field strength, occupied bandwidth, channel power, adjacent channel power ratio, and carrier to interference ratio (C/I) tests. In addition, AM/FM/SSB demodulation is available to aid in the identification of interfering signals. This section presents brief examples demonstrating the use of these measurements.
Press the Measurements main menu key followed by the Spectrum submenu key. Refer to Field Measurements for further spectrum measurement procedures.