Spectrum Analyzer Measurement Guide : Interference Analyzer (Option 25) : Measurements Menu : Signal ID Menu
Signal ID Menu
Key Sequence: Measurements > Signal ID
IA Signal ID Menu
Scan Type
The Signal ID feature in the Interference Analyzer can help to quickly identify types of the interfering signals.
All: Identifies all frequencies within the designated span.
Freq: Displays the signal data for the selected scan frequency in the Signal ID Results window.
Scan Freq
Press this submenu key to enter a desired center frequency for monitoring.
Continuous Monitoring
Press this submenu key to continuously sweep across the start and stop frequencies, entered frequency span, or scan frequency.
Single Sweep and Review
Initially places the Signal ID feature in single sweep mode while making a single sweep for review. For subsequent individual sweeps, press the Trigger Sweep submenu key.
Trigger Sweep
Press this submenu key to trigger another sweep when the Single Sweep and Review submenu key is activated.
Returns to the Measurements Menu.