Spectrum Analyzer Measurement Guide : Coverage Mapping (Option 431) : Coverage Mapping Menu : Point Distance/Time Setup Menu
 
Point Distance/Time Setup Menu
Key Sequence: Shift > Measure (4) key > Coverage Mapping > Point Distance/Time Setup
Point Distance/Time Setup Menu
Repeat Type
Toggles between using a Time or Distance interval for capturing data. Refer to Map the Signal Strength. You may have to move the instrument around for data collection, and you may need to tap the touch screen if indoors.
Repeat Time
When the Repeat Type is Time and GPS is turned On for outdoor coverage mapping, use this submenu key to set the time interval between measurements. For indoor mapping (GPS is Off), the instrument interpolates position measurements in a straight line between each pair of screen-tap locations.
Repeat Distance
When the Repeat Type is Distance and GPS is turned On for outdoor mapping, use this submenu key to set the distance interval between measurements. For indoor mapping (GPS is Off), the instrument places all new measurements at the next screen-tap location. Note that the distance interval is approximate depending on GPS accuracy.
 
Distance Units
Toggles the unit of measure between meters and feet.
 
 
 
 
Delete ALL Points
Deletes any and all map points.
 
Back
Returns to the Coverage Mapping Menu.