Spectrum Analyzer Measurement Guide : AM/FM/PM Analyzer (Option 509) : Coverage Mapping Menu : Mapping Save/Recall Menu
 
Mapping Save/Recall Menu
Key Sequence: Measure or (Shift + 4) > Coverage Mapping > Save/Recall Points/Maps
AM/FM/PM Mapping Save/Recall Menu
Save KML Points
Press this button to save the KML points. FileName.kml will be stored in the selected location. From the File menu, press Save then Change Save Location to change the default location.
Save Tab Delimited Points
Press this button to save the points in a tab delimited text file. FileName.mtd will be stored in the selected location.
Save JPG
Press the Save JPG key to save a .jpg file of the current screen.
Recall a Map
Opens the Recall submenu (shown at the bottom left of this page) for selecting a map to display on the screen. The default map type is .azm. Press the File Type submenu key to select a different map type to recall.
Recall KML Points Only
Opens the Recall menu for selecting a .kml file. Displays the saved locations overlaid on the current map or the default grid.
Recall KML Points With Map
Opens the Recall menu for selecting a .kml file. The map that was used when the points were saved will be recalled if it is available.
Recall Default Grid
If you do not have a GPS embedded map but are out in the field making measurements, the Recall Default Grid submenu allows you to save points and the corresponding GPS coordinates (or screen coordinates for indoor maps) to view at a later time. You can also load the map after acquiring points, or switch maps at any time without losing data.
Back
Returns to the Coverage Mapping Menu.