 | In Spectrum Analyzer mode, this menu is used to automatically save measurements to the current save location after any of the following events: ...Crossing Limit On Off When this submenu key is set to On, measurement data is automatically saved when the trace crosses a limit line that has been specified with the Limit menu. ...Sweep Complete On Off When this key is set to On, measurement data is automatically saved after the current sweep is completed. Save Then Stop On Off Set this key to On to stop the sweep after a measurement is saved. If this setting is Off and Sweep Complete is On, a measurement is saved after every sweep. Clear All Press this key to turn Off all three Save On Event keys: Crossing Limit Sweep Complete Save Then Stop Back Press this key to return to the File Menu. |