Power Meter Measurement Guide : High Accuracy Power Meter : Zero/Cal Menu
 
Zero/Cal Menu
Key Sequence: Zero/Cal
High Accuracy Power Meter Zero/Cal Menu
Zero
With no power applied to the sensor and pressed On, the sensor is set to zero. This is recommended when making power measurements below – 20 dBm.
Cal Factor
Press this submenu key to open the Cal Factor menu. Set the desired frequency by setting the center frequency or using a signal standard.
Center Freq: Press this submenu key, then use the number keypad, arrow keys, or rotary knob to set the frequency.
Signal Standard: Press this submenu key to open a list box and select a signal standard.
Back: Press this submenu key to return to the Zero/Cal menu.