This subsystem contains commands that relate to the optional GPS (Global Positioning System) on the instrument.
GPS On/Off
[:SENSe]:GPS
Description
Enables/disables optional GPS capability. The query version returns 0 when the GPS is Off and returns 1 when the GPS is On.
Requires Option 31.
Syntax:
[:SENSe]:GPS OFF|ON|0|1 [:SENSe]:GPS?
Cmd Parameters
<boolean> OFF|ON|0|1
Query Responses
<bNR1> 0|1
Default Value
Off
Front Panel Access
Shift 8 (System), GPS, GPS On/Off
GPS Reset
[:SENSe]:GPS:RESet
Description
Resets optional GPS receiver.
Requires Option 31.
Syntax:
[:SENSe]:GPS:RESet
Cmd Parameters
NA
Query Responses
NA (no query)
Front Panel Access
Shift 8 (System), GPS, Reset
GPS Antenna Current
[:SENSe]:GPS:CURRent?
Description
Query only. Reads the current draw of the GPS antenna in mA.
Requires Option 31.
Syntax:
[:SENSe]:GPS:CURRent?
Cmd Parameters
NA (query only)
Query Responses
<integer>
Front Panel Access
Shift 8 (System), GPS, GPS Info
GPS Antenna Voltage
[:SENSe]:GPS:VOLTage
Description
Sets and Reads the voltage setting for the GPS antenna. To set the voltage to 3.3 V, send the 0 parameter after the command. To set the voltage to 5 V, send the 1 parameter after the command. The query version returns 0 for an antenna voltage of 3.3 V and returns 1 for an antenna voltage of 5 V.
Requires Option 31.
Syntax:
[:SENSe]:GPS:VOLTage 0|1 [:SENSe]:GPS:VOLTage?
Cmd Parameters
<bNR1> 0|1
Query Responses
<bNR1> 0|1
Front Panel Access
Shift 8 (System), GPS, GPS Voltage Shift 8 (System), GPS, GPS Info