Web Search

Spectrum Master™ Programming Manual
1 Introduction
2 Programming Overview
Controller Interface
Conventions
3 Remote Commands
3.1 IEEE Common Commands
3.2 System
3.3 Spectrum Analyzer
:CALCulate:MARKer Subsystem
Display Subsystem
Format Subsystem
INITiate Subsystem
INSTrument Subsystem
MMEMory Subsystem
SENSe Subsystem
[:SENSe]:BANDwidth|BWIDth Subsystem
CORRection Subsystem
[:SENSe]:DETector Subsystem
[:SENSe]:FREQuency Subsystem
[:SENSe]:POWer Subsystem
[:SENSe]:SWEep Subsystem
Trace Subsystem
Trigger Subsystem
3.4 WCDMA
Format Subsystem
MMEMory Subsystem
SENSe Subsystem
Trace Subsystem
4 Measurement Commands
4.1 System
4.2 Spectrum Analyzer
FETCh Commands
MEASure Commands
READ Commands
SENSe (Measurement Command) Subsystem
[:SENSe]:OBWidth Subsystem
[:SENSe]:TGENerator Subsystem
4.3 WCDMA
FETCh Commands
MEASure Commands
READ Commands
SENSe (Measurement Command) Subsystem
[:SENSe]:OTA Subsystem
[:SENSe]:RF Subsystem
A Examples
C/C++
Visual Basic
LabVIEW™
Master Programming Manual Revision History