Conventions The following conventions have been used throughout the document. Notational Conventions This document uses several notational conventions. They are listed below. :COMMands:WILL:LOOK:LIKE:THIS Commands will be formatted to differentiate them from text descriptions. :COMMand:QUERies:LOOK:LIKE:THIS? The query form of the command will be followed by a “?” Front-panel key sequences use this formatting Front-panel keypresses will be formatted to differentiate them from text descriptions. Key presses are separated by a comma (“,”). <identifier> Identifiers will be enclosed in “< >”. They indicate that some type of data must be provided. | The “|” indicates that a choice must be made. [optional input] Optional input will be enclosed in “[ ]”. Identifiers The following identifiers have been used throughout the remote command definitions. Descriptions are provided here. In most cases, units will be specified with the individual command. Identifier Description <amplitude> Amplitude value. Units specified with the command. <freq> Frequency. Units specified with the command. <integer> Integer value, no units. Range specified with the command. <number> Numeric value, integer or real. <percentage> Percentage value from 0-100. Units are always “%”. <rel ampl> Relative amplitude. Units are always dB. <x-parameter> Parameter value in the units of the x-axis. Units are specified with the command. <string> The string should be enclosed in either single quotes (‘ ’) or double quotes (“ ”). <file name> The name should be enclosed in either single quotes (‘ ’) or double quotes (“ ”). The need for an extension will be documented with applicable commands. <voltage> Voltage. Units specified with the command. <current> Current. Units specified with the command.
