MMEMory Subsystem

The Mass MEMory subsystem contains functions that provide access to the instrument’s setup and data storage.

Delete Setup/Measurement

:MMEMory:DELete <file name>

Deletes the measurement or setup file specified by <file name>.

<file name> should be enclosed in either single quotes (‘’) or double quotes (“”) and should contain a file extension “.stp” for setup and “.spa” for measurement.

Front Panel Access:	Shift-7 (File), Delete, Delete Selected File
See Also:	:MMEMory:STORE:STATe, :MMEMory:STORe:TRACe

 

Recall Setup

:MMEMory:LOAD:STATe <integer>,<file name>

Loads the current setup from the file specified by <file name>.

The instrument must be in the mode of the saved setup in order to recall that setup. Use :INSTrument:SELect or :INSTrument:NSELect to set the mode.

<file name> should be enclosed in either single quotes (‘’) or double quotes (“”) and should include the extension “.stp”.

The <integer> parameter is not currently used, but it must be sent. Send a 0.

Front Panel Access:	Shift-7 (File), Recall, Recall Setup
See Also:	:MMEMory:STORe:STATe

 

Recall Measurement

:MMEMory:LOAD:TRACe <integer>,<file name>

Recalls the trace specified by <file name> into the trace specified by <integer>.

The instrument must be in the mode of the saved trace in order to recall that trace. Use :INSTrument:SELect or :INSTrument:NSELect to set the mode.

Valid <integer> values are 1, 2 and 3. They correspond to traces A, B and C, respectively.

<file name> should be enclosed in either single quotes (‘’) or double quotes (“”) and should include a file extension.

File Extensions:	“.spa”
Front Panel Access:	Shift-7 (File), Recall, Recall Measurement
See Also:	:MMEMory:STORe:TRACe

 

Save Setup

:MMEMory:STORe:STATe <integer>,<file name>

Stores the current setup into the file specified by <file name>.

<file name> should be enclosed in either single quotes (‘’) or double quotes (“”) and should not contain a file extension.

The <integer> parameter is not currently used, but it must be sent. Send a 0.

Front Panel Access:	Shift-7 (File), Save, Save Setup
See Also:	:MMEMory:LOAD:STATe

 

Save Measurement

:MMEMory:STORe:TRACe <integer>,<file name>

Stores the trace in trace A into the file specified by <file name>.

<file name> should be enclosed in either single quotes (‘’) or double quotes (“”) and should not contain a file extension.

The <integer> parameter is not currently used, but it must be sent. Send a 0.

Front Panel Access:	Shift-7 (File), Save, Save Measurement
See Also:	:MMEMory:LOAD:TRACe

 

Copyright 2011 Anritsu Company
	Anritsu Company
	1800-ANRITSU
	10450-00034, Rev. A
	mmdtechpubs@anritsu.com