Spectrum Master™ Programming Manual : 3 Remote Commands : [:SENSe]:SWEep Subsystem
[:SENSe]:SWEep Subsystem
This subsystem includes commands that affect the sweep generator of the instrument.
Minimum Sweep Time
[:SENSe]:SWEep:TIME
[:SENSe]:SWEep:TIME?
Sets the value of the minimum sweep time parameter. The sweep will complete in the shortest time possible greater than the specified time.
To sweep as fast as possible, enter the minimum value allowed for the sweep time.
Factory Preset / *RST:
50 μs
Range:
10 μs to 600000000 μs
Default Unit:
seconds
Front Panel Access:
Shift-3 (Sweep), Min Sweep Time
 
STATus Subsystem
The commands in this subsystem relate to the current operating state of the instrument.
Query Operation Status
:STATus:OPERation?
This command requests information about the current status of the instrument. Each bit of the return value represents some operation. Only a subset of the bits will be implemented for each application.
The number returned will be the decimal representation of the bit-wise OR of the enabled bits.
Bit
Decimal Value
Description
0
1
Not implemented
1
2
Not implemented
2
4
Not implemented
3
8
Not implemented
4
16
Not implemented
5
32
Not implemented
6
64
Not implemented
7
128
Not implemented
8
256
Sweep Complete – This bit will be set to 0 when the command :INITiate[:IMMediate] is sent to trigger a sweep. It will have a value of 1 when the sweep has completed.
9
512
Not implemented
10
1024
Not implemented
11
2048
Not implemented
12
4096
Not implemented
13
8192
Not implemented
14
16384
Not implemented
15
0
Will always be 0
 
SYSTem Subsystem
This subsystem contains commands that affect instrument functionality that does not directly relate to data collection, display or transfer.
Query Installed Options
:SYSTem:OPTions?
Returns a string of the installed options. Options will be separated by a “/”.
The string will return “NONE” if no options are installed.
See Also:
*IDN?
 
Preset
:SYSTem:PRESet
This command restores all application parameters to their factory preset values. This does not modify system parameters such as Ethernet configuration, language, volume or brightness.
Front Panel Access:
Shift-1 (Preset), Preset
See Also:
*RST
 
TGENerator Subsystem
This subsystem contains commands related to the tracking generator.
Tracking Generator Output Power
:TGENerator:OUTput:POWer <amplitude>
:TGENerator:OUTput:POWer?
Sets the output power for the Tracking Generator.
Factory Preset / *RST:
-40 dBm
Range:
0 dBm to -40 dBm
Default Unit:
Current active amplitude unit
Front Panel Access:
SPA: Shift-4 (Measurements), Tracking Generator, Output Power
 
See Also:
:INITiate[:TGENerator]
 
Copyright 2011 Anritsu Company
Anritsu Company
1800-ANRITSU
10450-00034, Rev. A
mmdtechpubs@anritsu.com