SENSe (Measurement Command) Subsystem

This subsystem contains commands related to preparing the instrument to make a particular measurement. These measurements are not defined in the SCPI standard so they are maintained separately here.

[:SENSe]:ACPower Subsystem

This subsystem includes commands related to configuring the adjacent channel power ratio measurement.

ACPR Adjacent Channel Bandwidth

[:SENSe]:ACPower:BANDwidth|BWIDth:ADJacent <freq>

[:SENSe]:ACPower:BANDwidth|BWIDth:ADJacent?

Sets the adjacent channel bandwidth for the ACPR measurement.

Factory Preset / *RST:	10.35 MHz
Range:	10 Hz to 7.1 GHz
Default Unit:	Hz
Front Panel Access:	Shift-4 (Measure), ACPR, Adj Ch BW

 

ACPR Main Channel Bandwidth

[:SENSe]:ACPower:BANDwidth|BWIDth:MAIN <freq>

[:SENSe]:ACPower:BANDwidth|BWIDth:MAIN?

Sets the main channel bandwidth for the ACPR measurement.

Factory Preset / *RST:	10.35 MHz
Range:	10 Hz to 7.1 GHz
Default Unit:	Hz
Front Panel Access:	Shift-4 (Measure), ACPR, Main Ch BW

 

ACPR Channel Spacing

[:SENSe]:ACPower:BANDwidth|BWIDth:SPACing <freq>

[:SENSe]:ACPower:BANDwidth|BWIDth:SPACing?

Sets the channel spacing for the ACPR measurement.

Factory Preset / *RST:	10.35 MHz
Range:	1 Hz to 7.1 GHz
Default Unit:	Hz
Front Panel Access:	Shift-4 (Measure), ACPR, Ch Spacing

 

ACPR Measurement State

[:SENSe]:ACPower:STATe OFF|ON|0|1

[:SENSe]:ACPower:STATe?

Sets the state of the adjacent channel power ratio measurement, ON or OFF.

When using :CONFigure:ACPower, the state is automatically set to ON.

Factory Preset / *RST:	OFF
Front Panel Access:	Shift-4 (Measure), ACPR, On/Off
See Also:	:CONFigure:ACPower

 

[:SENSe]:CHPower Subsystem

This subsystem includes commands related to configuring the channel power measurement.

Channel Power Integration Bandwidth

[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <freq>

[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration?

Sets the integration bandwidth for the channel power measurement.

Integration bandwidth must be less than or equal to the frequency span.

Factory Preset / *RST:	10.35 MHz
Range:	10 Hz to 7.1 GHz
Default Unit:	Hz
Front Panel Access:	Shift-4 (Measure), Channel Power, Ch Pwr Width
See Also:	[:SENSe]:FREQuency:SPAN

 

Channel Power Measurement State

[:SENSe]:CHPower:STATe OFF|ON|0|1

[:SENSe]:CHPower:STATe?

Sets the state of the channel power measurement, ON or OFF.

When using :CONFigure:CHPower, the state is automatically set to ON.

Factory Preset / *RST:	OFF
Front Panel Access:	Shift-4 (Measure), Channel Power, On/Off
See Also:	:CONFigure:CHPower

 

[:SENSe]:FSTRength Subsystem

This subsystem includes commands related to configuring the field strength measurement.

Field Strength Antenna

[:SENSe]:FSTRength:ANTenna <antenna>

[:SENSe]:FSTRength:ANTenna?

Selects an antenna from the antenna list to use for field strength measurement result calculations.

The <antenna> argument is a 1-based index of the position of the desired antenna in the instrument’s current antenna list. The list can be seen on the instrument by choosing the “Antenna” soft-key button in the “F Strength” menu. For example, if the desired antenna were the 3rd item on the antenna listing then the value of the <antenna> argument would be 3.

The query form of this command will return the index of the currently-selected antenna.

Factory Preset / *RST:	1
Front Panel Access:	Shift-4(Measure), Field Strength, Antenna
See Also:	:CONFigure:FSTRength

 

Field Strength Measurement State

[:SENSe]:FSTRength:STATe OFF|ON|0|1

[:SENSe]:FSTRength:STATe?

Sets the state of the field strength measurement, ON or OFF.

When using :CONFigure:FSTRength, the state is automatically set to ON.

Factory Preset / *RST:	OFF
Front Panel Access:	Shift-4 (Measure), Field Strength, On/Off
See Also:	:CONFigure:FSTRength

 

Copyright 2011 Anritsu Company
	Anritsu Company
	1800-ANRITSU
	10450-00034, Rev. A
	mmdtechpubs@anritsu.com