Spectrum Master Programming Manual : WCDMA Commands : :CALCulate Subsystem
 
:CALCulate Subsystem
The commands in this subsystem process data that has been collected via the SENSe subsystem.
:CALCulate:MARKer:AOFF
Title
Turn All Markers Off
Description
Turns off all markers.
Front Panel Access
Marker, All Markers Off
:CALCulate:MARKer{1|2|3|4|5|6}:X <x-parameter>
:CALCulate:MARKer{1|2|3|4|5|6}:X?
Title
Marker X Value
Description
Sets the location of the marker on the x‑axis at the specified location. <x‑parameter> is defined in the current x‑axis units. The query version of the command returns the location of the marker on the x‑axis. Note that the marker is snapped to the data point closest to the specified value. If the specified marker is not on it is set to on.
Parameter
<x‑parameter>
Default Unit
Current x‑axis unit
Example
To set reference marker #2 to 1 GHz on the x‑axis:
:CALCulate:MARKer2:X 1
:CALCulate:MARKer2:X 1GHz
To set reference marker #1 to 1.5 GHz on the x‑axis:
:CALCulate:MARKer:X 1.5GHz
:CALCulate:MARKer1:X 1.5GHz
Front Panel Access
Marker, Marker [1/2/3/4/5/6]
:CALCulate:MARKer{1|2|3|4|5|6}:Y?
Title
Marker Read Y Value
Description
Reads the current Y value for the specified marker. The units are the units of the y‑axis.
Default Unit
Current y‑axis unit
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe] OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}[:STATe]?
Title
Marker State
Description
Sets the specified marker on/off.
Parameter
OFF|ON|0|1
Parameter Type
<boolean>
Default Value
OFF
Example
To turn off reference marker #1:
:CALCulate:MARKer1:STATe OFF
Front Panel Access
Marker, On/Off