Turn All Markers Off

Turn off All markers in RF Channel Spectrum and RF Power vs. Time.

Marker, Markers Off

Delta Marker 1 X Value

Sets/Queries the relative location of the delta marker from the reference marker on the x‑axis. Note: The query value might not always match the set value since the instrument will round the set value based on the display pixel resolution.

In Channel Spectrum view, the x1 parameter is used to set the delta position. The x2 parameter is ignored. For example, :CALC:MARK1:DELT:X 2 MHz will set the delta value to 2 MHz. In Power vs. Time view, the x2 parameter is used to set the delta position.

The units must be specified (valid units are us, ms, s). The x1 parameter value is ignored but is required. For example, :CALC:MARK1:DELT:X 0,1 ms will set the delta value to 1 ms.

<x1 parameter>,<x2 parameter>

Hz in RF Channel Spectrum view and microseconds in Power vs Time view.

:CALCulate:MARKer1:X

Marker, Marker Select (M1), Marker State (Delta), (Use arrow keys or rotary knob.)

Delta Marker 1 Read Y Value

Reads the current absolute Y value for delta marker 1.

dBm

Set Marker 1 to Peak

Moves marker 1 to peak position on data trace.

NA

Marker, Marker Select (M1), Peak Search

Set Marker 1 State

Sets marker 1 on/off or delta.

<char>

OFF

Marker, Marker Select (M1), Marker State

Set Marker 1 Value

Sets/Queries the location of marker 1 on the x‑axis at the specified location.

In Channel Spectrum view, the x1 parameter is used to set the position. The x2 parameter is ignored. For example, :CALC:MARK1:X 756.24 MHz will set Marker 1 to 756.24 MHz.

In Power vs. Time view, the x2 parameter is used to set the position of the marker in time units.

The units must be specified (valid units are us, ms, s). The x1 parameter value is ignored but is required. For example, :CALC:MARK1:X 0,1 ms will set Marker 1 to 1 ms.

<x1 parameter>,<x2 parameter>

Hz in RF Channel Spectrum view and microseconds in Power vs. Time view.

Marker, Marker Select [1/2/3/4/5/6] (use arrow keys or rotary knob)

Marker 1 Read Y Value

Reads the current Y value for marker 1.

dBm

Delta Marker 2 X Value

Sets/Queries the relative location of the delta marker from the reference marker on the x‑axis. Note: The query value might not always match the set value since the instrument will round the set value based on the display pixel resolution.

In Channel Spectrum view, the x1 parameter is used to set the delta position. The x2 parameter is ignored. For example, :CALC:MARK2:DELT:X 2 MHz will set the Marker 2 delta value to 2 MHz.

In Power vs. Time view, the x2 parameter is used to set the delta position. The units must be specified (valid units are us, ms, s). The x1 parameter value is ignored but is required.

For example, :CALC:MARK2:DELT:X 0,1 ms will set the Marker 2 delta value to 1 ms.

<x1 parameter>,<x2 parameter>

Hz in RF Channel Spectrum view and microseconds in Power vs. Time view.

Marker, Marker Select (M2), Marker State (Delta), (Use arrow keys or rotary knob.)

Delta Marker 2 Read Y Value

Reads the current absolute Y value for delta marker 2.

dBm

Set Marker 2 to Peak

Moves marker 2 to peak position on data trace.

NA

Marker, Marker Select (M2), Peak Search

Set Marker 2 State

Sets marker 2 on/off or delta.

<char>

OFF

Marker, Marker Select (M2), Marker State

Set Marker 2 Value

Sets/Queries the location of marker 2 on the x‑axis at the specified location.

In Channel Spectrum view, the x1 parameter is used to set the position. The x2 parameter is ignored. For example, :CALC:MARK2:X 756.24 MHz will set Marker 2 to 756.24 MHz.

In Power vs. Time view, the x2 parameter is used to set the position of the marker in time units. The units must be specified (valid units are us, ms, s). The x1 parameter value is ignored but is required. For example, :CALC:MARK2:X 0,1 ms will set Marker 2 to 1 ms.

<x1 parameter>,<x2 parameter>

Hz in RF Channel Spectrum view and microseconds in Power vs. Time view.

Marker, Marker Select (M2), Peak Search

Marker2 Read Y Value

Reads the current Y value for marker 2.

dBm