PIM Master™ Passive Intermodulation Analyzer : Appendix G — LAN and DHCP : Ethernet Configuration : Ethernet Config
  
Ethernet Config
Press this submenu key to display the Ethernet submenu and to open the Ethernet Editor dialog box in order to set the IP address of the instrument.
Setting IP Address Manually
 
Ethernet Menu
Key Sequence: Shift, System (8) > System Options > Ethernet Config
Ethernet Menu
Type
Manual DHCP
Press this submenu key to select whether the address will be entered manually, or will be supplied automatically by a network DHCP server. If Manual is selected, then use the submenu keys or the Left/Right arrow keys to select the field that is to be modified. Use the keypad or the Up/Down arrow keys to enter the input. Press Enter to accept the changes, or press the Esc key to return to normal operation without changing anything.
Field
IP G‑Way Sub
Press this submenu key to select the desired Internet Protocol Property to be edited.
First Octet
Moves the cursor to the left most column of the selected IP properties field.
Second Octet
Moves the cursor to the second column from the left of the selected IP properties field.
Third Octet
Moves the cursor to the third column from the left of the selected IP properties field.
Fourth Octet
Moves the cursor to the forth column from the left of the selected IP properties field.