PIM Master™ Passive Intermodulation Analyzer : File Management : Managing Files
  
Managing Files
Press the Shift key then the File (7) key on the number keypad to display the File menu. The following steps describe file management.
Note 
When navigating through the File menu, pressing the Esc key returns the menu display to the previous menu.
File Types
In the Save, Recall, Copy, and Delete menus, a submenu key is used to select the type of files to be managed. The Change Type Setup/JPEG/... and File Type_ALL submenu keys open the Select File Type list box, which displays all of the file types that can be selected in the current instrument mode.
The Select File Type list box may contain some of the following entries:
• ALL (displays all file types)
• Setup, *.stp
(Setup files contain basic instrument information, measurement mode setup details, measurement marker data, and limit data.)
• Measurement, *.pim
(Measurement files contain all of the measurement data and all of the information in the setup files.)
• JPEG, *.jpg
• Limit Lines, *.lim
(The Limit line file contains limit line data details. The Limit function is available only in PIM versus Time and Swept PIM measurements.)
You can also use the touch screen to open the drop down list for the Filetype entry box, as shown in Figure: Save Dialog Box, Figure: Recall Dialog Box, Figure: Copy Dialog Box, and Figure: Delete Dialog Box.
File types *.map and *.kml (for two-dimensional and three-dimensional map functions) are not use by the PIM Master.