VectorStar™ MS464xB Series Microwave Vector Network Analyzer Calibration and Measurement Guide : Differential Noise Figure (Option 48) : References
 
References
1. J. Randa, “Noise characterization of multiport amplifiers,” IEEE Trans. Micr. Theory Techn., vol. 49, pp. 1757–1763, Oct. 2001.
2. S. Wedge and D. Rutledge, “Noise waves and passive linear multiports,” IEEE Micr. Guid. Wave Lett., vol. 1, pp. 117–119, May 1991.
3. L. Boglione, “Generalized determination of device noise parameters,” IEEE Trans. Micr. Theory Techn., vol. 65, pp. 4014–4025, Oct. 2017.
4. Y. Chang, S. Lin, H. Liao, H. Chiou, and Y. Juang, “On-wafer differential noise figure and large signal measurements of low-noise amplifier,” Proc. 39th Eur. Micr. Conf., Oct. 2009, pp. 699–702.
5. J. Dunsmore and S. Wood, “Vector corrected noise figure and noise parameter measurements of differential amplifiers,” Proc. 39th Eur. Micr. Conf., Oct. 2009, pp. 707–710.
6. M. Robens, R. Wunderlich, and S. Heinen, “Differential noise figure de-embedding: a comparison of available approaches,” IEEE Trans. Micr. Theory Techn., vol. 59, pp. 1397–1407, May 2011.
7. Y. Andee, C. Arnaud, F. Graux, and F. Danneville, “De-embedding differential noise figure using the correlation of noise output waves,” 84th ARFTG Conf. Dig., Dec. 2014, pp. 1–4.
8. A. A. Michelson and E. W. Morley, “On the relative motion of the earth and the luminiferous ether”. American Journal of Science, vol. 34, pp. 333–345, Dec. 1887.