VectorStarâ„¢ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :STATus:OPERation Subsystem
 
:STATus:OPERation Subsystem
The :STATus:OPERation subsystem commands are used to set and output values from the Operation Status Enable Register.
 
:STATus:OPERation:CONDition?
Description
Query only.
Returns the value of the operation status condition register.
Query Parameters
<NR1> The output parameter is an integer.
Range
0 to 32767
Default Value
0
Syntax Example
:STAT:OPER:COND?
:STATus:OPERation:ENABle <NRf>
:STATus:OPERation:ENABle?
Description
Sets the value of the operation status enable register.
Returns the value of the operation status enable register.
Cmd Parameters
<NRf> The input parameter is a unitless number.
Query Parameters
<NR1> The output parameter is an integer.
Range
0 to 65535
Default Value
NA
Syntax Example
:STAT:OPER:ENAB 1
:STAT:OPER:ENAB?
:STATus:OPERation:NTRansition <NRf>
:STATus:OPERation:NTRansition?
Description
Sets the value of the negative transition filter of the operation status register.
Returns the value of the negative transition filter of the operation status register.
Cmd Parameters
<NRf> The input parameter is a unitless number.
Query Parameters
<NR1> The output parameter is an integer.
Range
0 to 65535
Default Value
NA
Syntax Example
:STAT:OPER:NTR 1
:STAT:OPER:NTR?
:STATus:OPERation:PTRansition <NRf>
:STATus:OPERation:PTRansition?
Description
Sets the value of the positive transition filter of the operation status register.
Returns the value of the positive transition filter of the operation status register.
Cmd Parameters
<NRf> The input parameter is a unitless number.
Query Parameters
<NR1> The output parameter is an integer.
Range
0 to 65535
Default Value
NA
Syntax Example
:STAT:OPER:PTR 1
:STAT:OPER:PTR?
 
:STATus:OPERation[:EVENt]?
Description
Query only.
Returns the value of the operation status event register.
Query Parameters
<NR1> The output parameter is an integer.
Range
0 to 32767
Default Value
0
Syntax Example
:STAT:OPER?