 | |
1 | USB cable, connect to Anritsu instrument |
2 | Coaxial cable with type N male connector to instrument’s RF In. |
3 | Coupling nut for antenna connector. |
4 | Antenna connector (male type N). Connect directional antenna or filter and antenna combination. Refer to Antenna and Filter Selection for additional information. |
5 | Pulling the MA2700A trigger prompts the Anritsu analyzer to beep. Release the trigger after the initial beep (< 1 second) to capture location and signal data. Release the trigger after the second beep (~ 2 seconds) to toggle the preamp in the MA2700A and the Anritsu analyzer’s preamp On or Off. The Field Master series analyzer preamp functions are provided in the instrument user interface menu and the MA2700A preamp is not used. |
6 | Internal electronic compass and GPS receiver |
7 | Included shoulder strap |
8 | Internal preamplifier |
9 | 1/4-20 UNC tripod mount |