MA2700A InterferenceHunter Help : MA2700A Overview : Connections
Connect the MA2700A to an instrument for locating interference signals as follows:
1. Connect a directional antenna to the male N-connector (inside the coupling nut).
MA2700A with Attached Yagi Antenna
2. Connect the USB cable between the MA2700A and the Anritsu instrument.
3. Connect the coaxial cable between the MA2700A and the Anritsu instrument’s RF Input connector.
Once detected, the MA2700A can be used to capture bearing and/or GPS data while in other interference mode measurements and even other supported instrument measurement modes, including spectrum analyzer mode.