Safety Symbols
To prevent the risk of personal injury or loss related to product malfunction, Anritsu Company uses the following symbols to indicate safety-related information. For your own safety, please read the information carefully before operating the product.
Symbols Used in Manuals
Danger
This indicates a risk from a very dangerous condition or procedure that could result in serious injury or death and possible loss related to product malfunction. Follow all precautions and procedures to minimize this risk.
Warning
This indicates a risk from a hazardous condition or procedure that could result in light-to-severe injury or loss related to product malfunction. Follow all precautions and procedures to minimize this risk.
Caution
This indicates a risk from a hazardous procedure that could result in loss related to product malfunction. Follow all precautions and procedures to minimize this risk.
Safety Symbols Used on Product and in Manuals
The following safety symbols are used inside or on the product near operation locations to provide information about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and take the necessary precautions before operating the product. Some or all of the following five symbols may or may not be used on all Anritsu products. In addition, there may be other labels attached to products that are not shown in the diagrams in this manual.
This indicates a prohibited operation. The prohibited operation is indicated symbolically in or near the barred circle.
This indicates a compulsory safety precaution. The required operation is indicated symbolically in or near the circle.
This indicates a warning or caution. The contents are indicated symbolically in or near the triangle.
This indicates a note. The contents are described in the box.
These indicate that the marked part should be recycled.
For Safety
Danger
Using the MA2700A InterferenceHunter while a car is in motion could be dangerous and lead to serious accidents.
Warning
Always refer to the operation manual when working near locations at which the alert mark, shown on the left, is attached. If the operation, etc., is performed without heeding the advice in the operation manual, there is a risk of personal injury. In addition, the product performance may be reduced. Moreover, this alert mark is sometimes used with other marks and descriptions indicating other dangers.
Warning
This product can not be repaired by the operator. Do not attempt to remove the product covers or to disassemble internal components. Only qualified service technicians with a knowledge of electrical fire and shock hazards should service this product. There are high-voltage parts in this product presenting a risk of severe injury or fatal electric shock to untrained personnel. In addition, there is a risk of damage to precision components.
For Safety
Caution
Electrostatic Discharge (ESD) can damage the highly sensitive circuits in the instrument. ESD is most likely to occur as test devices are being connected to, or disconnected from, the instrument’s front and rear panel ports and connectors. You can protect the instrument and test devices by wearing a static-discharge wristband. Alternatively, you can ground yourself to discharge any static charge by touching the outer chassis of the grounded instrument before touching the instrument’s front and rear panel ports and connectors. Avoid touching the test port center conductors unless you are properly grounded and have eliminated the possibility of static discharge.
Repair of damage that is found to be caused by electrostatic discharge is not covered under warranty.