WiMAX Signal Analyzer Measurement Guide : Fixed WiMAX Signal Analyzer : Fixed WiMAX Measurements
 
Fixed WiMAX Measurements
The following measurements can be made when the instrument is set to Fixed WiMAX mode.
Channel Power (RSSI)
Channel power measures the average time domain power within the selected bandwidth and is expressed in dBm. Received Signal Strength Indicator (RSSI) is vendor‑defined in the standard and is typically the same as Channel Power.
Occupied BW
The occupied bandwidth is calculated as the bandwidth containing 99 % of the transmitted power.
Data Burst Power
Data Burst power is the RMS power over the data burst part of the WiMAX downlink subframe.
Preamble Power
Preamble power is the RMS power over the preamble part of the WiMAX downlink subframe.
Crest Factor
Crest Factor is the ratio of the peak to average power over the entire downlink subframe.
Freq Error
The difference between the measured carrier frequency and the specified carrier frequency is the frequency error. This number is only as accurate as the frequency reference that is used. Frequency error is displayed in both Hz and ppm. Option 31 (GPS Receiver) can be used for improved frequency accuracy when an external reference is not available at a BTS.
EVM (Error Vector Magnitude)
The Error Vector Magnitude (in percent) displays the difference between the reference waveform and the measured waveform, and then EVM is normalized.
Relative Constellation Error (RCE)
Relative Constellation Error is similar to EVM but is expressed in dB (RCE = 20 log (EVM) where EVM is expressed in % ⁄ 100) Both rms and peak values over an entire downlink subframe are displayed.
Carrier Frequency
Carrier Frequency is the measured frequency of the input signal after demodulation, and is the same as the tuned Center Frequency of the instrument plus the measured Frequency Error from demodulation.
Base Station ID
Each transmitter has a unique ID of 48 bits. These instruments display the ID as Base Station ID by decoding the FCH (Frame Control Header), the lower significant bits (LSB) of 4 bits of the downlink frame.
Adjacent Subcarrier Flatness (Peak)
Adjacent Subcarrier Flatness is the absolute difference between the adjacent sub carriers.