1. Press the Track Gen Off/On submenu key to turn On and Off the output of the tracking generator. The output power turns on at the level that has been set previously with the Output Power submenu key.
2. Press the Output Power submenu key and set the output power (at the output connector) from 0 dBm to – 40 dBm, in 0.1 dB steps. The output is leveled and flat over the specified frequency range of the tracking generator.
3. If you change a setting and want to restart the sweep, press the Reset Sweep submenu key. The sweep restarts at the lowest frequency that is selected and also restarts Averaging.