Press the Amplitude main menu key to display the Amplitude menu.
Note
All RF output is disabled unless the RF ON/OFF main menu key is toggled to RF Output: ON. Refer to RF On/Off.
Set Signal Level:
1. Press the Signal Level submenu key. The signal level value on the submenu key turns red for editing.
2. Enter the desired signal amplitude using the keypad, the arrow keys, or the rotary knob.
3. To complete data edit or entry, press Enter or ESC to cancel.
Set Interferer Level:
1. Press the Interferer Level submenu key. The interferer level value on the submenu key turns red for editing.
2. Enter the desired interferer level using the keypad, the arrow keys, or the rotary knob
3. Press Enter to complete the entry or ESC to cancel.
Set Noise Level:
1. Press the Noise Level submenu key. The noise level value on the submenu key turns red for editing.
2. Enter the desired noise level using the keypad, the arrow keys, or the rotary knob
3. Press Enter to complete the entry or ESC to cancel.
Set Level Offset:
1. Press the Level Offset submenu key. The level offset value on the submenu key turns red for editing.
2. Enter the desired level offset using the keypad, the arrow keys, or the rotary knob.
3. Press Enter to complete the entry or ESC to cancel.
VSG Levels Display (example only, your instrument may differ)
Set the Signal, Interferer, and Noise Output Modes
1. Press the Signal submenu key to select CW, Mod (modulation), or Off. When Signal is set to Off, the display indicator and data window text are colored gray. When Signal is set to CW or Mod, the display indicator and data window text are colored yellow. The CW indicator is arrow shaped, while the Mod indicator is rectangle shaped.
2. Press the Interferer submenu key to select CW, Mod (modulation), or Off. When interferer is set to Off, the display indicator and data window text are colored gray. When interferer is set to CW or Mod, the display indicator and data window text are colored green. The CW indicator is arrow shaped, while the Mod indicator is rectangle shaped.
3. Press the Noise submenu key to toggle Noise On or Off. When Noise is set to Off, no indicator is displayed, but data window text is colored gray. When noise is set to On, a white line is drawn horizontally across the graphic display window, and data window text is colored white.
