This set of commands prepares the instrument for the selected measurement. It disables any currently-enabled measurements and activates the specified measurement. It sets the instrument to single sweep mode, waiting for an :INITiate command. It will not initiate the taking of a measurement.
Current instrument settings may be changed to default values. These changes are identified with their respective measurement commands.
:CONFigure:MEASure?
Title:
Current Active Measurement Mode
Description:
Reports the current active measurement mode.
Front Panel Access
Measurements (Active measurement is indicated by the red button.)
:CONFigure:MEASure:1PHase
Title:
Configure 1-Port Phase Measurement
Description:
Changes the current measurement to 1-Port Phase.
Related Command:
:CONFigure:MEASure:?
Front Panel Access
Shift-4 (Measure), More, 1-Port Phase
:CONFigure:MEASure:CABLoss
Title:
Configure Cable Loss
Description:
Changes the current measurement to Cable Loss.
Related Command:
:CONFigure:MEASure:?
Front Panel Access
Shift-4 (Measure), Cable Loss
:CONFigure:MEASure:RLDTf
Title:
Configure DTF Return Loss
Description:
Changes the Cable & Antenna measurement to DTF Return Loss.