BTS Master Programming Manual : WCDMA Commands : :ABORt Subsystem
 
:ABORt Subsystem
The abort subsystem includes commands that allow the user to stop current measurement activities on the instrument.
:ABORt
Title
Abort
Description
Restarts the current sweep and/or measurement. Resets the trigger system. If :INITiate:CONTinuous is OFF (i.e. the instrument is in single sweep mode), send the command :INITiate[:IMMediate] to trigger the next sweep. If :INITiate:CONTinuous is ON (i.e. the instrument is in continuous sweep mode), a new sweep will start immediately.
Parameter
NA
Related Command
:INITiate:CONTinuous
:INITiate[:IMMediate]