BTS Master Programming Manual : LTE Commands : :CALCulate Subsystem
 
:CALCulate Subsystem
The commands in this subsystem process data that has been collected via the SENSe subsystem.
:CALCulate:MARKer:AOFF
Title
Turn All Markers Off
Description
Turns off all markers in Channel Spectrum.
Front Panel Access
Marker, Markers Off
:CALCulate:MARKer1:DELTa:X <x1 parameter>
:CALCulate:MARKer1:DELTa:X?
Title
Delta Marker 1 X Value
Description
Sets/Queries the relative location of the delta marker from the reference marker on the x‑axis.
Note: The query value might not always match the set value since the instrument will round the set value based on the display pixel resolution.
The x1 parameter is used to set the delta position. For example, CALC:MARK1:DELT:X 2 MHz will set the delta value to 2 MHz.
Parameter
<x1 parameter>
Default Unit
Hz
Related Command
:CALCulate:MARKer1:X
Front Panel Access
Marker, Marker Select (M1), Marker State (Delta), (Use arrow keys or rotary knob.)
:CALCulate:MARKer1:DELTa:Y?
Title
Delta Marker 1 Read Y Value
Description
Reads the current absolute Y value for delta marker 1.
Default Unit
dBm
:CALCulate:MARKer1:MAXimum
Title
Set Marker 1 to Peak
Description
Moves marker 1 to peak position on data trace.
Parameter
NA
Front Panel Access
Marker, Marker Select (M1), Peak Search
:CALCulate:MARKer1:STATe OFF|ON|DELta
:CALCulate:MARKer1:STATe?
Title
Set Marker 1 State
Description
Sets marker 1 on/off or delta.
Parameter
OFF|ON|DELta
Parameter Type
<char>
Default Value
OFF
Front Panel Access
Marker, Marker Select (M1), Marker State
:CALCulate:MARKer1:X <x-parameter>
:CALCulate:MARKer1:X?
Title
Set Marker 1 Value
Description
Sets/Queries the location of marker 1 on the x‑axis at the specified location.
Parameter
<x‑parameter>
Default Unit
Hz
Front Panel Access
Marker, Marker Select [1/2/3/4/5/6] (use arrow keys or rotary knob)
:CALCulate:MARKer1:Y?
Title
Marker 1 Read Y Value
Description
Reads the current Y value for marker 1.
Default Unit
dBm
 
:CALCulate:MARKer2:DELTa:X <x1 parameter>
:CALCulate:MARKer2:DELTa:X?
Title
Delta Marker X Value
Description
Sets/Queries the relative location of the delta marker from the reference marker on the x‑axis.
Note: The query value might not always match the set value since the instrument will round the set value based on the display pixel resolution.
The x1 parameter is used to set the delta position.
For example, :CALC:MARK2:DELT:X 2 MHz will set the delta value to 2 MHz.
Parameter
<x1 parameter>
Default Unit
Hz
Related Command
:CALCulate:MARKer2:X
Front Panel Access
Marker, Marker Select (M2), Marker State (Delta), (Use arrow keys or rotary knob.)
:CALCulate:MARKer2:DELTa:Y?
Title
Delta Marker 2 Read Y Value
Description
Reads the current absolute Y value for delta marker 2.
Default Unit
dBm
:CALCulate:MARKer2:MAXimum
Title
Set Marker 2 to Peak
Description
Moves marker 2 to peak position on data trace.
Parameter
NA
Front Panel Access
Marker, Marker Select (M2), Peak Search
:CALCulate:MARKer2:STATe OFF|ON|DELta
:CALCulate:MARKer2:STATe?
Title
Set Marker 2 State
Description
Sets marker 2 on/off or delta.
Parameter
OFF|ON|Delta
Parameter Type
<char>
Default Value
OFF
Front Panel Access
Marker, Marker Select (M2), Marker State
:CALCulate:MARKer2:X <x-parameter>
:CALCulate:MARKer2:X?
Title
Set Marker 2 Value
Description
Sets/Queries the location of marker 2 on the x‑axis at the specified location.
Parameter
<x‑parameter>
Default Unit
Hz
Front Panel Access
Marker, Marker Select (M2), Peak Search
:CALCulate:MARKer2:Y?
Title
Marker2 Read Y Value
Description
Reads the current Y value for marker 2.
Default Unit
dBm