Mobile InterferenceHunter Help : Display Layout : Menu Bar
 
Menu Bar
The menu bar extends across the top of the application window and includes four menu categories: File, View, Mode, Settings and Help. This topic describes the basic set of menu items. These menus are disabled when MIH is in either run modes.
Menu Bar
File Menu
Open Log File (Ctrl+O): Opens the file directory to load a saved drive test data set (.log file). This is useful for reviewing test results and documenting hunting excursions. Log files can be opened or appended to existing data to aggregate multiple runs. The log file can also be opened as a playback file. A playback file is like reviewing the gathered data as a movie.
Save Log File (Ctrl+S): Saves the current drive test data set. If you clear the data, you will not be able to get it back unless it has been saved. Saved data is only useful to reload and review previous interferer hunts.
Create a Drive Route: A drive route is useful in discovering the location of an interferer. Create a Drive Route allows you to create a driving route using Google maps. As a matter of convenience, it should be created at the office then sent to the technician out in the field. Both the field tech-supervisor and field technician should be signed into the same Google Maps account. (This means that the Google Maps account will most likely be a company account rather than a personal account.)
Import Location Estimate: The location files (.loc) were produced by the Anritsu Vision software. The estimated locations are a result of the different techniques used to locate an interferer:
Angle of Arrival (AoA)
Power on Arrival (POA)
Time Difference of Arrival (TDOA)
Once imported, the data from .loc files will be displayed on the Drive Map Display. Use this information to create a drive route.
Capture Screen (Ctrl+C): Captures the current map display and saves it to the directory folder labeled Anritsu ScreenShots. The captured screen is in PNG format and labeled with the date and time stamp. Screen Capture Folder: Opens the file directory containing all of the captured screens. The directory folder is labeled Anritsu ScreenShots.
Note 
The Anritsu ScreenShots folder is created during the installation of Mobile InterferenceHunter and is placed in the My Documents folder.
Save Current Settings: Opens the Save As window. Name the file and press Save. The file extension .mih, will be added to the end of the name given. Most MIH settings and key instrument settings are saved.
Recall Saved Settings: Opens the Open window containing all of the configuration settings files. These MIH files are located in the default directory folder, My Documents.
Recent Settings…: Opens a list of up to 10 previously saved Settings files to choose from.
Save Setup on Spectrum Analyzer: Allows you to initiate a save setup on the instrument from the MIH software. Click on this command to open the Filename dialog and enter a name for the setup file to be saved on the instrument. After the setup name has been entered, press the OK button.
Recall Setup on Spectrum Analyzer: Use this command to load a setup on the instrument for measurement testing. Click on this command to open the Select a Setup File dialog. A list of Setup files on the instrument is displayed. Select the desired setup file then press the Load button.
Licensing: Opens a list of commands related to instrument licenses:
View Licenses (Ctrl+V): Opens the About Anritsu Mobile InterferenceHunter dialog. It contains the lists of single instrument license keys and/or network license keys currently in use.
Import Machine License(s): Click on this command to import a single instrument license key.
Export Licenses: Creates a file containing all of the licenses on that PC that can be imported to another PC. Note that a license can be associated with only one Anritsu instrument.
Exit: Closes the Mobile InterferenceHunter program. Any data collection not saved will be erased at this time.