Connecting via an Ethernet Crossover Cable
1. Connect the laptop to the instrument Ethernet port with a crossover cable.
2. Set the host PC to a static IP address as follows:
a. Click Start Menu > Control Panel > Network and Sharing Center.
b. Click Change adapter settings.
c. Right-click on Local Area Connection and click on Properties.
d. Select Internet Protocol Version 4 (TCP/IPv4), click Properties, and then set the following:
• IP Address = 10.0.0.1
• Default Gateway Address = 10.0.0.0
• Subnet Mask = 255.255.255.0
3. Set the Anritsu handheld instrument Ethernet settings as follows:
a. Open the System menu via Shift System (8).
b. Click the System Options menu.
c. Click Ethernet Config and set the following:
• IP Address = 10.0.0.2
• Default Gateway Address = 10.0.0.0
• Subnet Mask = 255.255.255.0
4. Open a browser on the computer and enter the URL address 10.0.0.2 to access the handheld instrument web interface.