PIM Master™ Passive Intermodulation Analyzer with Site Master™ Cable and Antenna Analyzer and 2-Port Option Measurement Guide : Distance‑to‑PIM (DTP) : Trace Submenu Key
 
Trace Submenu Key
For the complete Measurements menu description, refer to Measurements Menu. For the Trace menu description, refer to Trace Menu, Distance‑to‑PIM. The Measurements menu Trace Overlay submenu key is described here:
Trace Menu – Distance‑to‑PIM
 
 
 
 
 
 
 
 
 
 
 
 
Trace Overlay
Off DTP DTF
Press this submenu key to toggle the trace overlay function settings.
If no valid DTP trace is available, then pressing this submenu key briefly displays a warning message on the screen. For a description of valid trace, refer to Valid Trace.
If a valid DTP trace is available, and if DTP overlay trace memory does not contain a valid trace, then pressing this submenu key creates a copy of the active trace and stores it in overlay trace memory. After a valid DTP trace is stored in overlay memory, this submenu key only toggles the view Off and On.