Configuring the PIM Master for Wireless Browser Control
Wi‑Fi links are useful in the field, particularly when the PIM Master is on a tower, and you are on the ground. For wireless browser control, the PIM Master requires firmware version v1.15 or later. Firmware may be downloaded from the Anritsu Web site by following the links for “Downloads and Software” and “Handheld RF Firmware Updates”.
Using a ZyXEL MWR102 Travel Router
The ZyXEL MWR102 Travel Router is one of many suitable travel routers. All that you need to wirelessly connect to your analyzer is included with the router. This includes an Ethernet cable, a USB cable (for powering the MWR102), and instructions for use.
This router comes pre‑programmed with a password for accessing the device. This password can be found on a sticker placed on the reverse side of the router. Write down the password and SSID for the router. You will need this information to access it.
Example Router Data:
ZyXEL MWR102 Travel Router
Connecting the Router to the PIM Master
The router has two Ethernet ports. One is marked ‘LAN’ (colored black) and the other is marked ‘WAN’ (colored blue). Insert one end of the provided Ethernet cable into the black LAN port on the router, and insert the other end into the Ethernet port of your PIM Master.
Insert the Mini‑B (small) end of the provided USB cable into the router, and insert the Type‑A (larger) end of the cable into one of the USB ports of your PIM Master.
The router can be secured to your PIM Master chassis by using a small strip of Velcro or other hook‑and‑loop fastener.
