An identification uses the detected carriers as input and tries to find an underlying communication standard.
Note
An identification performance greatly depends on the accuracy of the detected carriers. In addition, identifying all standards and all detected carriers at the same time might be very time consuming and not reasonable.
Signal Identification Panel
Standard Selection
Satellite (DVB-S1, DVB-S2, and IESS), cellular, public safety and Wi-Fi (802.11a/b/g) standards are currently available for signal identification. Multiple standards can be chosen in the list.
Identification Controls
The identification is started via the Identify button. A cancel button allows to abort an identification process. It is also possible to export analysis results to PDF.
Identified Carriers
The progress status is displayed for each carrier identification and, if known, an underlying standard is shown afterwards. The highlighted carrier signal area will be colored green in the trace display. If a carrier cannot be identified, its Standard will list as Unknown and the carrier signal area in the trace display will be colored red. Carriers can also be added with an Add icon. Carriers are deleted through selection and applying a Trash Can icon.
