The MS276xA can be mounted onto a tripod or installed into a rack mount or other custom bracket. The back of the instrument has a typical 1/4-20 x 5.0 mm long threaded tripod mount (compatible with most commercial and consumer tripods) that provides a convenient field setup. Each side of the instrument has two M2.5 x 0.45 mm threaded bracket mounts for modular or permanent installations. Refer to the MS276xA TDS for detailed outline drawings and dimensions.
Warning
The mounting screw lengths must not exceed 1/4-20 x 5.0 mm long or M2.5 x 6.4 mm long. Do Not over tighten the screws or allow them to penetrate into the instrument as damage could result.
MS276xA Mounted to 1/4-20 Tripod (shows alternate M2.5 x 6.4 mm mounting screws)
