IQ Signal Master™ MX280005A Vector Signal Analysis Software Help : Basic Operation : Convert Mode : Import File Type
 
Import File Type
The Import File Type menus are shown in Table: Import File Type.
Import File Type
Anritsu DGZ (IQ Capture)
Select if importing from an Anritsu DGZ file.
Anritsu WVD
Select if importing from an Anritsu WVD file (Vector Signal Generator format).
Anritsu WCAP (IQ Capture)
Select if importing from an Anritsu WCAP file.
Anritsu.vsg
Select if importing from an Anritsu.vsg file.
Binary
Select if importing from a single raw data file that has IQ values.
Set the bit format as 8 bit, 16 bit, 24 bit, 32 bit Float, or 32 bit Integer.
Set the Endianness as Little Endian or Big Endian.
Text
Set the Text delimiter that appears between the I and Q values as Auto, Comma, Tab, or Semicolon. Auto automatically checks the delimiter.
SpectroX XDat File
Select if importing a SpectroX Xdat file. The .xdat file format is the file format required for analyses using the X-Com SpectroX software; .xdat files are for use in the SpectroX software.
Wave File
Select if importing a Wave file. Supported Wave files are not audio files. Some I/Q capture applications appropriate the Wave file format, using the two stereo channels to hold I and Q value pairs and storing the capture parameters in the Wave file header.
Center Frequency
Center frequency value of the imported IQ file. The underline indicates this value can be changed. Press Center Frequency to change the center frequency value.
Bandwidth
Bandwidth value of the imported IQ file. The underline indicates this value can be changed. Press Bandwidth to change the bandwidth value.
Sample Rate
Sample rate value of the imported IQ file. The underline indicates this value can be changed. Press Sample Rate to change the center frequency value.
Sample Count
sample count of the imported IQ file. This value cannot be changed.
Maximum Value
Maximum value of the imported IQ file. This value cannot be changed.
RMS Value
RMS value of the imported IQ file. This value cannot be changed.
Draw
Select the IQ data screens to view by checking or unchecking I, Q, and Magnitude.