IQ Signal Masterâ„¢ MX280005A Vector Signal Analysis Software Help : Basic Operation : Modulation Parameters Tab : Parameters Descriptions
 
Parameters Descriptions
Click the parameter Summary Icon to show the Parameters Settings listed in Table: Description of Parameters (Frame Formatted).
Description of Parameters (Frame Formatted)
Parameter
General Information
Center Frequency
Displays the center frequency of the signal.
Frequency Span
Displays the frequency span of the signal.
Sample Rate
Displays the sample rate.
Reference Level
Displays the reference level of the signal.
Modulation Type
Displays the modulation scheme.
Modulation Index
Displays the modulation index, the ratio of amplitude of the massage signal to the amplitude of the carrier signal.
Sample Rate
Displays the sample rate.
Measurement Filter
Shows the filter setting of the reception signal.
Reference Filter
Shows the filter setting of the reference signal.
Roll Off / BT
Displays the Roll Off rate and/or BT of the measurement filter and reference filter.
Slots / Frame
Displays the number of slots per frame.
Slot Length
Displays the number of symbols per slot.
Measurement Offset
Displays the measurement start position in symbols.
Measurement Interval
Displays the measurement interval.
1st Sync Word Search
Displays the 1st sync word pattern.
1st Sync Word
Displays the 2nd sync word pattern.
2nd Sync Word Search
Displays the 1st sync word pattern.
2nd Sync Word
Displays the 2nd sync word pattern.
Burst Search
Displays whether burst search can be executed.
Burst Gap
Displays the number of data to measure before rise and fall of a burst waveform.