Rubidium™ MG362x1A Product Information, Compliance, and Safety : Regulatory Compliance : Compliance Notifications
 
Compliance Notifications
Note 
Depending on the economic region/area that your equipment is marketed for, certain labels may not be applicable. Please refer to the markings affixed to your equipment, the product data sheet, and its declaration of conformity on https://www.anritsu.com/en-us/
CE Conformity Marking
Anritsu affixes the CE Conformity marking onto its conforming products in accordance with Council Directives of The Council Of The European Communities in order to indicate that these products conform to the EMC, LVD, RoHS, and RED directive of the European Union (EU).
European Parliament and Council Directive 2012/19/EC
Equipment Marked with the crossed-out Wheelie Bin symbol complies with the European Parliament and Council Directive 2012/19/EC (the “WEEE Directive”) in the European Union.
For Products placed on the EU market after August 13, 2012, please contact your local Anritsu representative at the end of the product’s useful life to arrange disposal in accordance with your initial contract and the local law.
RCM Conformity Marking
Anritsu affixes the Regulatory Compliance Mark (RCM) onto its conforming products in accordance with the electromagnetic compliance regulations of Australia and New Zealand in order to indicate that these products conform to the EMC regulations of Australia and New Zealand.
KCC Conformity Marking
Anritsu affixes the Korean Communications Commissions (KCC) mark onto its conforming products in accordance with the electromagnetic compliance regulations of Korea
Canadian ICES-001 and ICES-003 Conformity Marking
CAN ICES-1(A)/NMB-1(A)

CAN ICES-3(A)/NMB-3(A)
Anritsu affixes the CAN ICES-1(A)/NMB-1(A) and CAN ICES-3(A)/NMB-3(A) compliance labels onto its conforming products in accordance with the following Canadian Interference-Causing Equipment Standards:
ICES-001 — Industrial, Scientific and Medical (ISM) Radio Frequency Generators
ICES-003 — Information Technology Equipment (ITE).
Recycle Marking
Anritsu affixes the universal recycle symbol onto its products to indicate that the marked part is made from recyclable materials and should be recycled. Materials should be recycled in accordance with your local regulatory requirements.
Proposition 65 Notification
State of California Proposition 65 Notification: https://www.p65warnings.ca.gov
Notification for California customers: Chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm may be present in the products listed in Applicable Product Models or their related accessories. For information, see: https://oag.ca.gov/prop65
Effective August 31, 2018, the State of California requires customer notification of products manufactured after August 31, 2018 that contain substances listed in the Proposition 65 substance list, in amounts exceeding Significant Risk Levels/Dosage levels, which are known in the state of California to cause cancer, or birth defects, or reproductive harm. This requirement applies to products sold in California or products that may be exposed to people in the state of California.
While Anritsu does not believe there is risk of significant exposure with our products, it is possible that some of the listed substances identified by Proposition 65 are present with the electronic components and instruments manufactured by Anritsu. Anritsu is providing this warning out of an abundance of caution to fully comply with the Proposition 65 Law and as an information service to our customers.
Please visit https://oehha.ca.gov/proposition-65/chemicals for a complete listing of chemicals considered or listed under Proposition 65 (this list and web site are maintained by the Office of Environmental Health Hazard Assessment [OEHHA], one of six agencies under the umbrella of the California Environmental Protection Agency [CalEPA]).
Perchlorate Material Notification – Special Handling May Apply
Notification for California customers: this product uses a small Lithium battery installed internally on the circuit board that may contain perchlorate. Disposal may be regulated due to environmental considerations. Please contact your local authorities for disposal or recycling information. For information, see: http://www.dtsc.ca.gov/hazardouswaste/perchlorate
Chinese RoHS Compliance Statement