Informational Messages
No application loaded. Factory reset required
In Toolbar, Log, Persistent
Rebooting Instrument
In Toolbar, No Log, Transient
Rebooting instrument into Recovery mode
In Toolbar, No Log, Transient
Attempt to reboot instrument into Recovery mode failed
In Toolbar, Log, Transient
Presetting Instrument
In Toolbar, No Log, Transient
Preset Completed
In Toolbar, No Log, Transient
Resetting Instrument
In Toolbar, Log, Transient
Reset Completed
In Toolbar, Log, Transient
External reference detected – switching reference source to external%1
In Toolbar, Log, Transient
External reference disconnected – switching reference source to internal%1
In Toolbar, Log, Transient
External reference disconnected – switching reference source to Internal High%1
In Toolbar, Log, Transient
External reference disconnected – switching reference source to GPS%1
In Toolbar, Log, Transient
Could not lock to external reference – check connection and try again%1"
In Toolbar, Log, Transient
Internal High reference no longer valid – switching frequency reference source to Internal%1
In Toolbar, Log, Transient
Internal High reference no longer valid – switching time reference source to Internal"
In Toolbar, Log, Transient
GPS reference detected – switching time reference source to GPS
In Toolbar, Log, Transient
GPS reference no longer available – switching time reference source to Internal High
In Toolbar, Log, Transient
Could not lock to internal reference
In Toolbar, Log, Persistent
Software update files found on USB
In Toolbar, No Log, Transient
USB drive %1 ejected
In Toolbar, No Log, Transient
Failed to connect to %1
In Toolbar, No Log, Transient
Successfully connected to %1
In Toolbar, No Log, Transient
Connecting to %1
In Toolbar, No Log, Persistent
File saved successfully %1
In Toolbar, No Log, Transient
File save failed %1
In Toolbar, No Log, Transient
File recalled successfully
In Toolbar, No Log, Transient
File does not exist
In Toolbar, No Log, Transient
Memory Full
In Toolbar, No Log, Transient
Memory Full
In Toolbar, No Log, Popup
Options %1 are not valid for the currently installed firmware version. The device might not function properly
In Toolbar, No Log, Persistent
Options upgraded. Please restart the instrument to use new features
In Toolbar, No Log, Transient
Error %1
In Toolbar, Log, Transient
File %1 import successfully
In Toolbar, No Log, Transient
File %1 export successfully
In Toolbar, No Log, Transient
Save failed. File size exceeds save limits. Adjust setup and try again
In Toolbar, Log, Transient